Parmar Steel

Parmar Steel Industries is the leading supplier of EN24 Round Bars. Buy EN24 online which is free from any defects. EN 24 material properties are high tensile strength, high hardness and resistance to wear and tear from extreme stress. EN24 Round bar sizes are from 20mm dia to 250mm dia. The material's dimension can be supplied as per Customer's specifications. EN 24 steel can be forged to enhance the material's mechanical properties. EN24 is also manufactured in EN24T Condition which has additional tensile strength. EN24 full form is European standard 24. 

 

EN24 Bright Bars are available in ready stock. There is a large inventory of EN24 steel round bars, in all quantities. National Steel Industries is one of the leading manufacturers of EN24 steel in India. EN24 turning can also be done as required by the customer.

Get Quote

We provide high quality EN24 Flat Bars, Forged Blocks and Forged Circles. EN24 round bar rate will be given to the customer when a customer gives us an enquiry. EN24 Sheets and Plates supplied of premium quality.

EN24 is readily machinable and is therefore used to make machine parts such as gears, screws, rollers, shafts, crankshafts, punches etc. EN24 steel finds its application in industries such as automobile industry, aviation industry, civil industry, chemical industry, etc. EN24 data sheet and tempering curve predict that the material can be performed with heat treatments such as quenching, tempering, annealing, and normalization.

EN8 round bar is pure medium carbon steel with decent ductile strength compared to normal mild steel. EN8 steel is appropriate for all round manufacturing applications, which require advanced strength such as manufacturing tubes, studs, bolts, linking rods, screws, rollers etc.

EN8 bright bar is a medium power cheerful mild steel that is appropriate for general manufacturing purposes that need steel of a higher power than mild steel. Characteristic uses include tubes, studs, screws and keys. Better superiority than EN3 but is less effortlessly machined.

EN8 bright mild steel round is a medium power which is suitable for over-all engineering determinations that need steel of a higher strength than mild steel. EN8 bright square bar have been cold over, cold drawn. EN8 grade is a pure, medium carbon Steel, which has extraordinary strength levels as compared to normal Bright Mild Steel, due to flask mechanical rolling.

EN8 rod is also a pure medium carbon steel which is used in applications where improved properties than mild steel are obligatory but where the costs do not defend the purchase of a steel alloy. EN8 can be heat preserved to provide a good surface rigidity and moderate wear resistance by blaze or introduction hardening processes.

Additional Information:

• Delivery Time: READY STOCK

Parmar Steel is a recognized trader, manufacturer and dealer of EN Series CS Round Bars, which is the low carbon version of the alloy. EN Series Carbon Steel Square Bars has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing sulphur gases are not present. With its high chromium content, EN Series Carbon Steel Flat Bars offers good corrosion resistance to increase high temperature properties.

En series carbon steel round bars are available in a diverse selection of diameters, which typically range from a few millimeters to several inches. They are available in a variety of classifications, including En8, En9, En19, En24, En36, and many others, each of which has its own unique characteristics and applications.

EN Series Carbon Steel Hexagonal Bars is often used at cryogenic temperatures, with excellent toughness to -450 Degree F, and low magnetic permeability. EN Series Carbon Steel Triangular Bars is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. EN Series Carbon Steel Bars does not readily corrode, rust or stain with water as ordinary steel does. However, EN Series Carbon Steel Rods is not fully stain-proof in low – oxygen, high – salinity, or poor air – circulation environments.

Additional Information:

• Delivery Time: READY STOCK

Parmar Steel is a recognized trader, manufacturer and dealer of EN Series CS Round Bars, which is the low carbon version of the alloy. EN Series Carbon Steel Square Bars has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing sulphur gases are not present. With its high chromium content, EN Series Carbon Steel Flat Bars offers good corrosion resistance to increase high temperature properties.

En series carbon steel round bars are available in a diverse selection of diameters, which typically range from a few millimeters to several inches. They are available in a variety of classifications, including En8, En9, En19, En24, En36, and many others, each of which has its own unique characteristics and applications.

EN Series Carbon Steel Hexagonal Bars is often used at cryogenic temperatures, with excellent toughness to -450 Degree F, and low magnetic permeability. EN Series Carbon Steel Triangular Bars is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. EN Series Carbon Steel Bars does not readily corrode, rust or stain with water as ordinary steel does. However, EN Series Carbon Steel Rods is not fully stain-proof in low – oxygen, high – salinity, or poor air – circulation environments.

Being the leaders in the industry, we offer EN Series to our prestigious clients. This series is highly durable and are used in various industrial applications. They are available in the form of bars and are presented at the best rates in the industry. These rods are seamless and are resistant to corrosion. Our various products includes EN Series Tool Steel Bars, EN Series Raw Brass Bars, EN Series Raw Copper, EN Series Stainless Steel Bars, EN Series Carbon Steel Bars and EN 8, 9, 15, 19, 24, 31, 36, 42, 47.

Additional Information:

• Delivery Time: READY STOCK

• EN8 also know as 080M40. Unalloyed medium carbon steel. EN8 is a medium strength steel, good tensile strength. Suitable for shafts, stressed pins, studs, keys etc. AISI 1040.
  Available as normalized or rolled. EN8 is supplied as round drawn/turned, round hot rolled, hexagon, square, flats and plate.
• EN8 is usually supplied untreated but can be supplied to order in the normalized or finally heat treated (quenched and tempered to ”Q” or “R”properties for limiting ruling sections up to 63mm), which is adequate for a wide range of applications. Please refer to our selection guide for comparisons.
• EN8 is a very popular grade of through-hardening medium carbon steel, which is readily machinable in any condition. (Refer to our machinability guide). EN8 is suitable for the manufacture of parts such as general-purpose axles and shafts, gears, bolts and studs. It can be further surface-hardened typically to 50-55 HRC by induction processes, producing components with enhanced wear resistance. For such applications the use of EN8D (080A42) is advisable. It is also available in a free-machining version, EN8M (212A42)
• EN8 in its heat treated forms possesses good homogenous metallurgical structures, giving consistent machining properties.

Chemical composition Heat Treatment

• EN8 or 080m40 can be tempered at a heat of between 550°C to 660°C (1022°F-1220°F), heating for about 1 hour for every inch of thickness, then cool in oil or water.
• Normalizing of EN8 bright mild steel takes place at 830-860°C (1526°F-1580°F) then it is cooled in air.

Welding

• Modern EN8 bright mild steel contains a lot less carbon then it uses to, this mean that it is possible to weld pieces up to 18mm thick without preheating using MIG wire (SG2) or a 7018 electrode.
• Over 18mm would require a pre-heat of 100°C (212°F) in order to prevent cracking.

Flame Cut Profiles

A hard edge can occur when flame cutting EN8 plate, therefore this grade is commonly normalized after flame cutting. EN8 flame cut profiles can be supplied Lumsden ground or precision ground.

Ground Flat Stock

Precision ground flat stock / gauge plate can be produced using EN8 steel. Subject to size suitability and availability of raw material pieces can be produced in approximately 2 to 3 weeks. Standard and non-standard sizes are available.

Applications

EN8 is widely used for many general engineering applications. Typical applications include shafts, studs, bolts, connecting rods, screws, rollers.

Forging

Preheat the steel carefully, and then raise temperature to 1050°C for forging. Do not forge below 850°C. After forging cool slowly, preferably in a furnace.

Annealing

Heat slowly to 680-710°C, soak well. Cool slowly in the furnace.

Hardening

Heat the component slowly to 820-860°C and allow it to be heated through. Quench in oil or water.

Tempering

Temper the EN8 component immediately after quenching whilst tools are still hand warm. Re-heat the EN8 component to the tempering temperature then soak for one hour per 25 millimeter of total thickness (2 hours minimum) Cool in air.

Welding

We recommend you contact your welding consumables supplier who should provide you full assistance and information on welding EN8 steel.

Additional Information:

• Delivery Time: Ready Stock

“EN8/C45/EN9 combined heavy forged” is a steel product that has undergone a rigorous heavy forging process and is a composite or blend of the carbon steel grades EN8, C45, and EN9. For certain purposes, this combination may be engineered to obtain particular mechanical qualities or performance attributes.

Such a material might be ideal for specialized industrial applications where normal carbon steels might not be sufficient since it could offer a specific combination of strength, toughness, wear resistance, and other required qualities. The precise composition, forging technique, and planned uses would determine the material’s particular characteristics and capabilities.

Measurement and Specifications:

• Round:

Diameter -180mm to 800mm

Lenghth-105mm to 10 meter

• Blocks:

Thickness– 80mm to 400mm

Width– 200mm to 800mm

Length– Upto 6 meter

Undoubtedly, medium carbon steels like EN8, EN9, and C45 are frequently utilised in a range of industrial settings. A synopsis of their characteristics is provided below:

• EN8 (080M40):

Chemical Composition: Usually consists of silicon (Si), phosphorus (P), sulphur (S), carbon (C), and manganese (Mn). The manufacturer and particular requirements may cause variations in the precise composition.

Mechanical Properties: EN8 exhibits strong wear resistance, hardness, and tensile strength. It can undergo heat treatment to produce a variety of mechanical qualities appropriate for various uses.

Applications: Frequently utilized in parts that need to balance strength with ductility, such as crankshafts, gears, shafts, and machine parts.

• EN9 (070M55):

Chemical Composition: Manganese, silicon, sulphur, phosphorus, and a larger carbon content than EN8 make up its chemical composition.

Mechanical Properties: Compared to EN8, EN9 has better hardness, fatigue strength, and wear resistance. It is renowned for being resilient and strong enough to handle demanding applications.

Applications: Suitable for parts that need to be harder and stronger, including crankshafts, gears, and other machine parts that are subjected to high loads and wear.

• C45 (1.0503):

Chemical Composition:Carbon, manganese, sulphur, phosphorus, and other trace elements are usually present.

Mechanical Properties: C45 offers a strong balance of durability, toughness, and resistance to wear. It can be heat treated to acquire particular mechanical qualities based on the needs of the application.

Applications: Widely utilized in a variety of industrial applications that call for a sturdy and dependable material, such as machinery parts, automobile components, and construction equipment.

Common Properties:

Carbon Content: The mechanical properties of all three classes of medium carbon steel are affected by the different carbon contents in them.

Heat Treatment: A variety of applications are possible by altering the mechanical characteristics of each grade by heat treatment.

Machinability: Drilling, turning, and milling are among the machining processes that these steels are appropriate for because of their typically good machinability.

Weldability: With the right techniques and safety measures, they can be welded without breaking or distorting.

Corrosion Resistance: These steels can be coated, plated, or treated in other ways to prevent corrosion, even if they are not stainless steel.

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

We offer EN Series Steel Round Bars, subjected to high abrasion resistance power. Made employing premium grade raw material and machinery, it is operational in automobile, aviation, engineering industries. customized on vast specifications, grades and sizes, it is professionally approved.

Features:

• High functionality


• Affordable prices


• 100% client satisfaction

Parmar Steel is a recognized trader, manufacturer and dealer of EN Series CS Round Bars, which is the low carbon version of the alloy. EN Series Carbon Steel Square Bars has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing sulphur gases are not present. With its high chromium content, EN Series Carbon Steel Flat Bars offers good corrosion resistance to increase high temperature properties.

En series carbon steel round bars are available in a diverse selection of diameters, which typically range from a few millimeters to several inches. They are available in a variety of classifications, including En8, En9, En19, En24, En36, and many others, each of which has its own unique characteristics and applications.

EN Series Carbon Steel Hexagonal Bars is often used at cryogenic temperatures, with excellent toughness to -450 Degree F, and low magnetic permeability. EN Series Carbon Steel Triangular Bars is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. EN Series Carbon Steel Bars does not readily corrode, rust or stain with water as ordinary steel does. However, EN Series Carbon Steel Rods is not fully stain-proof in low – oxygen, high – salinity, or poor air – circulation environments.

We are passionately engaged in providing an exclusive array of En Series Alloy Steel for our esteemed clients. This product is manufactured by our highly experienced professionals from the finest grade raw-material at par with the market prevalent norms. In addition to this, every single product offered by us is subject to a variety of tests to ensure that it complies with the set global quality standards. Our valuable clients can avail this series flat from us at industry leading prices.

Features:

• Rugged design
• High strength
• Easy to fit

Material Grade:

• EN 8,EN 9, EN 24, EN 31

Additional Information:

• Delivery Time: ready stock

PARMAR STEEL is a leading Stainless steel bright round bar manufacturer in India. Stainless steel bright  round bar beside having the characteristics or corrosions resistance has been developed over time to encapsulate end user applications. Ambica Steels Limited produces Improved Machining (IM) grades that were developed to enhance machining of the steel into components, grades for hardness by responding to heat treatment and grades with high corrosion qualities by adding additional elements to give it the characteristics desired.

Ambica Steels produces bright bars with a comprehensive range of stainless steel grade and sizes of stainless steel bright bar to cover most machining and structural applications.

Bright Bar Manufactured For Corrosion Resistant Premium Quality – Designed For Excellence!

PARMAR STEEL is a pioneer in export quality stainless steel bright bars manufactured in India which sizes ranging from 3 mm to 400 mm (0.11811 inches – 15.748 inches) diameter. We produce high ductility bolstering steel to avoid brittle failures while ensuring a high degree of safety. Our products are globally exported to more than 50 countries in greater than 100 stainless steel grades.

The alloy for en1a round bar is a low carbon-manganese steel grade. This free cutting steel is also available with a modified en1a leaded chemical composition as grade EN1A Pb. The modified alloy is known to have enhanced machinability properties.

The good en1a mechanical properties of these components like the en1a leaded round bar are why they are used for hydraulic settings. In fact, the en1a leaded manufacturers recommend using these components, particularly for those applications which involve intricate drilling as well as machining operations. Generally, this grade of en1a rod is well suited for machining operations that use both automatic and CNC machines.

Also referred to as 230M07, the en1a bright bar could be case hardened in order to produce components. Case hardened en1a hexagon bar has enhanced wear resistance properties. These properties of the en1a steel flat bar are useful for the production of components which require a superior finished surface with a high rate of manufacture.

In comparison to regular mild steel grades, the carbon steel en 1a bright bar provides tighter sectional tolerances, in addition to the increased straightness, as well as a much cleaner surface. Usually, the en1a hexagon bar is supplied an untreated and cold drawn or centreless turned condition.  The main benefit of an en1a square bar is that the alloy steel could be brought closer to the finished machine size. Thus providing a reduction in the cost of machining. Another advantage of bright en1a steel bar is a marked increase in the tensile strength in comparison to a hot rolled bar of the produced under the same condition.

Engineering steels are useful in multiple applications, especially since they contain several important characteristics. Classified as low alloy steel, the EN19 Round Bar  is referred to as engineering steel because the material has found its way into many mechanical engineering applications. The material could be produced under different standards to meet the requirement of the buyers including the various EN19 Flat Bar Sizes  required. As low alloy steel, the chemical contents of this material consist of the additions of both chromium and molybdenum. These two elements make the EN19 Hollow Bar  suited to fit many engineering applications as a high-quality alloy. Primarily the main use of this alloy is because of its high fatigue strength. Applications in engineering may have their equipment set in motion. Due to this, the external forces, including air or pressure may cause fatigue to steels that do not have good resistance to fatigue as well as and shock resistance. Yet the exemplary performance of the EN19 Bright Bar  is not complete without mention of properties such as high toughness, and good torsion strength in engineering applications. As a high quality alloy steel, the EN19 Square Bar  also has properties such as resistance to abrasion & impact resistance. Any Round Bar EN 19 Manufacturer  would recommend using this alloy because the material, like most conventional steels, can be heat treated. It is possible to treat the alloy in numerous ways in order to achieve a combination of properties.