Parmar Steel

Stainless Steel Plates offered by PARMAR STEEL are suited for a wide variety of applications. These have high resistance against corrosion, distortion, oxidation and abrasion. In addition, these are easy to form and are appreciable for their attractive appearance. Stainless Steel Plates are extensively demanded in several industries. They are preferred for their versatility in use, high-strength and corrosion resistance. Offered plates are provided with advanced structural integrity. Also, these can evade the need of extra structural support. The plates are used for making foundations in many types of buildings. Utilization of these cost-effective steel solutions can reduce the construction costs.

Alloy Steel Flanges are made in different steel alloys. The flanges vary in dimensions and types. There are ½ inches through 48 inches of nominal diameter sizes of flanges. Navstar Steel is a leading manufacturer of the ASTM A182 Low Alloy Steel flanges as well as the other types of alloys. The ASTM A 182 specification specifies flanges for high pressure services.

The flanges also come in B16.5, B16.47 and other standards and dimensions. The Alloy Steel Flange Material can vary according to the chemical composition. The grade 304 flanges are the most commonly used flanges and they have 18% chromium and 8% nickel in the composition. The ANSI B16.5 Alloy Steel Slip On Flange is a flange type that allows the pipes to slip onto the flange and makes the connection in a precise locations.


Features:

• Stainless steel flange and carbon steel flange
• Specifications:-
  
  • DN15 UP TO DN3000 IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS / Table 2. 5, table 6, table 10, table 16, table 25, table 40, table 64, table 160, table 320, table 400
  • A694 F42, A694 F46, A694 F52,
  • A694 F60, A694 F65, A694 F70

   

   

We Are Dealing in Inconel Flanges .We Are The Exporters , Stockist , Supplier, Manufacturer of all sizes of Inconel Flanges.

Forms :

• Slip On Flanges, Socket Weld Flanges, Blind Flanges, Lapped Flanges, Screwed Flanges, Weld Neck Flanges, Reducing Flanges, Spectacle Flanges, Slip On Boss Flanges, Plate Flanges, Plate Blank Flanges, Screwed Boss Flanges.

Flange Facing :

• Raised Face, Flat Face, Lapped Joint Face, Large Male-Female, Small Male-Female, Large Tongue & Groove, Small Tongue & Groove, Ring Joint

Standard :

• 125 Lb, 150 Lb, 300 Lb, 600 Lb, 900 Lb, 1500 Lb, 2500 Lb, 3000 PSI, 5000 PSI & 10000 PSI

Grades :

• Inconel 800 (UNS No. N08800)
• Inconel 825 (UNS No. N08825)
• Inconel 600 (UNS No. N06600)
• Inconel 625 (UNS No. N06625)
• Inconel 601 (UNS No. N06601)
• Size : 1/8" NB TO 48"NB.

Pipe Flanges are widely used as a popular category of pipe fittings. A flange is used to mechanically connect two pipes together. It can also be used to mechanically connect a pipe to a tee, valve, choke or any other piece of equipment. Flanges are available in round, square, and rectangular shapes. In some cases, flanges are usually in the shape of a ring or a plate to form a rim at the end of a pipe when fastened to the pipe. This is an example of closet flange.

A flange can also be a plate for covering or closing the end of a pipe. This is a blind flange. Thus, flanges are considered to be projecting or internal components which are used to support mechanical parts. They are like rims which are used to strengthen the mechanical part or they are a means of attaching that part to another part or surface.

In accordance with customers' variegated prerequisites, we deliver a recognized gathering of the Pipe Flanges. So as to give an extraordinary reach to our customers, these flanges are composed by utilizing advanced engineering by our capable experts. The offered flanges are given in a few sizes and details, according to the variegated necessities of our significant customers. Notwithstanding this, we give these flanges in a few modified alternatives and at mechanical heading costs.

Features:

•     Precisely-designed
•     Corrosion resistance
•     Durability

Specifications:
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H, 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel:
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel:
ASTM / ASME A 105
ASTM / ASME A 350 LF 2

Alloy Steel:
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91

Additional Information:

• Delivery Time: READY STOCK

Stainless Steel Flanges are products used in piping systems to connect pipes together. The flanges are more advantageous than fittings because they often have a projection perpendicular to the pipe’s length. This part of the flange helps for additional grip to the attachment. Roopam Steel is a manufacturer and supplier of stainless steel flanges in all shapes, sizes and material grades. The Stainless Steel Blind Flanges differ from all other flanges in that they actually do not connect more pipes to continue the piping, they terminate a piping. A blind flange is applied when the flow has to stop completely. The Stainless Steel Plate Flange just looks like a ring that can hold the pipe inside. When two of these plate flanges are fitted at the ends of two different pipes, it becomes easy to weld or bolt the pipes together.

The Stainless Steel Weld Neck Flange has a welded neck on it to provide extra strength; the SS Slip on Flange allows the pipes to slip on through it so that the pipe can be adjusted for the correct location of joint. The flanges could be made up of different methods as well. The SS Forged Flanges are common as they possess more strength from the forging from one piece of metal. The SS Threaded Flanges have threads at the ends and there are different pressure classes to the flanges such as the Class 300 Stainless Steel Flanges and the Class 150 SS Pipe Flange. Please contact us for more details. Are you looking for Stainless Steel Flanges Manufacturers In India. We have 20 years of experince in stainless steel flanges manufacturer in india. Buy gaskets for stainless steel flanges at best factory price. Looking for a specific design? Contact Stainless Steel Flanges manufacturers in India for accurate dimensions and lowest rates.

Additional Information:

• Packaging Details: Ready Stock

PARMAR STEEL manufactures Stainless Steel Flanges of different shapes and sizes with distinct specifications and customers’ requirements. We cater to the gigantic global demand of our customers spread across 6 continents around 96 countries. PARMAR STEEL flanges are reputed and well known across the globe for their reliability and quality. Our flanges division encompasses an integrated forge shop which manufacturers all types of pipe fittings i.e. flanges, butt welding fittings (ASME/ ANSI, EN, DIN, AFNOR, AWWA, GOST, BS, JIS, AS, MSS, SA, UNI etc.) as well as forged bars.

We produce flanges in the size range from ½” to 40”. PARMAR STEEL has an established and stringent quality system with more than 100 approvals and certifications following various specific requirements and applications. These approvals and certifications help us supply PARMAR STEEL Flanges to major end-users across a diverse list of industries.

Applications of Stainless Steel Flanges

• Pipeline engineering
• Oil & gas industry
• Mechanical engineering
• Plant engineering
• Marine industry
• Waste water management
• Chemical industry
• Petrochemical industry
• Power industry
• Aerospace
• Food processing industry and many more.

 

Our integrated facilities include cutting, forging, ring rolling, machines with CNC lathes, CNC drilling, high capacity forging press, and mobile manipulator for making big diameter forged round bars. We also have an in-house heat treatment shop and well-equipped laboratory facilities for ensuring the quality of our products.

Additional Information:

• Delivery Time: READY STOCK

Stainless steel flanges are an essential component of pipes and tubes, which helps to connect them. They are circular disks with concentric ridges or projections on their surface that help to grip the pipes and tubes tightly. Stainless steel flanges are highly durable and can withstand high pressure and temperature. These flanges are widely used in industrial applications and are available in various sizes, shapes, and types. This blog post will discuss different types of stainless steel flanges and their applications.

Weld-neck flanges are one of the most commonly used stainless steel in industrial applications. These flanges connect pipes or tubes to valves, pumps, or other equipment. The flange is welded to the pipe or tube, and then the equipment is bolted to the flange. This flange type is known for its high durability and ease of installation. Weld-neck flanges are commonly used in high-temperature and high-pressure applications.

Slip-on flanges are another stainless steel flange commonly used in industrial applications. A slip-on flange has a ring-shaped head that is slipped over the pipe or tube end and then welded. The flange is then bolted to the connected equipment. Slip-on flanges are commonly used in low-pressure and non-critical applications.

Blind flanges close off the end of a pipe or tube. They are commonly used in the piping system to allow for future expansion or maintenance activities. Blind flanges are welded to the pipe or tube end and prevent any flow through the pipe. These flanges are commonly used in high-pressure and high-temperature applications.

Socket weld flanges are stainless steel flange types with a socket or hole in the centre. The pipe or tube is inserted into the socket, and the flange is welded to the pipe or tube. Socket weld flanges are commonly used for smaller pipes and tubes and are also commonly used in high-pressure and high-temperature applications

We provide wide range of quality approved range of plate flanges that is used for connection between pipes and tubes in several industry verticals. Offered to our clients in several types like spectacle blind, slip on (SORF), blind (BLRF), lap joint, reducing, ring joint and large dia ring. These flanges are hot dip galvanized and epoxy coating for compliance with international standards like ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP and NACE. We also provide these flanges with MTC

Additional Information:

• Delivery Time: READY STOCK

• We at PARMAR STEEL would like to take the opportunity to introduce as a leading ASME B16.5 Class 300 Weld Neck Flanges Dimensions. ASME B16.5 Class 300 Weld Neck Flanges are stocked or available in the following range of materials and sizes for the oil, gas, petrochemical and allied industries. Pipes with ASME B16.5 Class 300 Weld Neck Flanges can be assembled and disassembled easily. SS ASME B16.5 Class 300 Weld Neck Flanges can be flanges.

  As a ASME B16.5 Class 300 Weld Neck Flanges Dimensions. we offer these ASME B16.5 stainless steel Class 300 rjt flanges, ASME B16.5 carbon steel Class 300 blind flanges, ASME B16.5 Alloy steel Class 300 weld neck flanges, ASME B16.5 stainless steel Class 300 slip on flanges, ASME B16.5 carbon steel Class 300 socket weld flanges in all standard in which the common world standards include ANSI/ ASME (USA), BS10 (British/ Australian), PN/ DIN (European) and JIS/ KS (Japanese/ Korean).

• Grade : F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
• Carbon Steel : ASTM A 105, ASTM A 181
• Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
• Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
• Copper Alloys : Copper, Brass & Gunmetal
• Size : 1/8" NB TO 48"NB.
• Class : 150, 300,400 ,600,900, 1500 & 2500 .
• Standard
• ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
• DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
• B.S : BS4504 , BS4504, BS1560, BS10

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Delivery Time: Ready Stock

Stainless Steel 304 Flanges are made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This composition makes the flanges strong and corrosion resistant for general corrosive services. Navstar Steel is a leading supplier and manufacturer of the SS 304 Flanges in various sizes and shapes. The material is strong with 515MPa minimum tensile strength and 205MPa minimum yield strength. The material is also corrosion resistant to most atmospheric conditions.

There are different types such as the A182 F304 SORF Flange which is a slip on raised face flange. The slip on flanges are suitable to be used with seamless pipes to make precise connection locations. The raised face of the flanges provides extra surface for connection either by welding or b bolting. The SS 304 WNRF Flange is a weld neck raised face flange. The raised face helps the attachment while the welded neck provides extra grip to hold the pipes in place. The flanges vary in sizes ranging from ½ inches to 48 inches in diameter.

The ASME SA182 SS 304 Blind Flanges are used to terminate a pipeline by ending the pipe at one place. There are different types of blind flanges as well. The 304 material is also heat resistant and can operate up to 870 degrees Celsius. This allows the SS UNS S30400 Pipe Flanges to be used in some high temperature services such as heat exchangers, boilers and condenser components. We supply all different types and scales of flanges such as the Stainless Steel DIN 1.4307 Screwed Flanges and others. Please feel free to contact us for further product information and pricing.

Additional Information:

• Delivery Time: READY STOCK

PARMAR STEEL is a specialised manufacturer of high quality ASME/ANSI/DIN standard plate flanges in India. We offer immediate delivery programs for standard size of carbon steel plate flanges and stainless steel plate flanges. Plate flanges can be manufactured as per custom size requirements of our customers.

Stainless steel plate flanges are manufactured from plated produced in accordance to the ASTM A240 and ASME SA240 standards. Plate flanges are widely accepted as an alternative to cast or forged flanges in low pressure applications because of the benefits listed below.

Advantages of Plate Flanges

• Free of any defects
• Superior grain structure compared to forged or cast products
• Extended service life
• Reduction of the normal maintenance costs

Plate flanges are most widely used in fuel and water pipelines, where two flange plates are bolted together with a gasket in between them. The flange plate will have bolt holes all around the perimeter and will be used to create junctions, tees and joints.

Our products are widely exported to countries and regions such as the United States, Europe, Russia, Turkey, Malaysia, the UAE, Saudi Arabia, Iran, Brazil, Chile, Mexico, South Africa, Jordan, Tunisia, Vietnam, Indonesia, Thailand, Singapore, Colombia, and Sri Lanka.

Flanges are used to connect pipes with each other, to valves, to fittings, and to specialty items such as strainers and pressure vessels. A cover plate can be connected to create a "blind flange". Flanges are joined by bolting, and sealing is often completed with the use of gaskets or other methods.

Stainless Steel Flanges are made up of different stainless steel materials. There are different grades to the stainless steel depending on the material composition and the mechanical properties vary. Parmarr Steel is a leading manufacturer and supplier of these flanges. The ASTM A182 Weld Neck Flange are made up of a super austenitic material that has good corrosion resistant properties with low carbon in its composition. The applications include utility scrubber assemblies. The flanges are also used in acid production and fertilizer production plants due to its corrosion resistance.

The Stainless Steel Pipe Flange is used to close a pipeline in these industries. The blind flange can be permanently fixed with welding or temporarily fixed by bolting for easy maintenance and removal. These flanges come in different sizes ranging from ½ inches to 48 inches in nominal bore size. There are also different types such as the SS Blind Flange Dimension belonging to different pressure classes. The pressure classes vary from 150 to 2500 and PN6 to PN64. These indicate the maximum pressure each flange can withstand while in operation.

Additional Information:

• Delivery Time: READY STOCK

We offer a comprehensive range of reducing flanges that is widely used for various industrial applications. Used for connecting, tubings and pipe sections, these reducing flanges are available in various configuration to meet the requirements of our variegated clients.

 

Range : 15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16, table 25, table 40, table 64, table 160, table 320, table 400

Form : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.

Carbon & Alloy Steel
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.

Steel threaded flange are offered in different pressure ratings, dimensions and other specifications. These threaded flanges are made of highest quality stainless steel.Varied range of threaded flange includes: Threaded Flange, threaded pipe flange, threaded reducing flange, ANSI threaded flange, blind flange, welding neck flange etc.
Stainless Steel : ASTM A 182, A 240

Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750

Carbon Steel : ASTM A 105, ASTM A 181

Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys : Copper, Brass & Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #

PARMAR STEEL. specialises as the manufacturer, supplier and exporter of Threaded / Screwed Flanges that give an impetus to businesses working in different verticals, and helping them expand into various other zones. The most noteworthy feature of these flanges is that they can be joined to a pipe without welding. The bore of Nickel Threaded / Screwed Flanges have threads and can be fitted to pipes that have external threads. Stainless Steel Threaded / Screwed Flanges are low priced, fit best for small pipes and can be used in low-pressure applications. They are very beneficial in highly combustible industries where welding is dangerous. We are certified to cater to the challenging requisites of a number of industries through our outstanding products and extraordinary services.

Threaded Flange Dimensions, Alloy Steel Threaded Plate Flanges, Nickel Alloy 200 Screwed Flange, Carbon Steel Threaded Flange, ASME B16.47 Series A and B Screwed Flanges, Manufacturer of Threaded Forged Flanges, ASTM A182 SS Threaded Flange, MSS SP-44 Threaded Flanges in Mumbai, India.Inconel Threaded Flanges, Stockholder Of DIN86029 PN10 Threaded Flange, Copper Nickel Screwed Flanges Exporter, Best Price of Duplex Steel Screwed Flanges, Hastelloy C22 Threaded Flange, Class 300, 600, 900, 1500 Threaded Flanges Wholesaler, Alloy 20 Threaded Flanges Traders in India.Standard Specification For Threaded / Screwed Flanges

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Size : 1/2" (15 NB) to 48" (1200NB)

Class : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.

DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673

BS : BS4504 , BS4504, BS1560, BS10

Flange Face Type : Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Parmar Steel manufactures and trades Stainless Steel 304 Flanges to a wide range of industries across the globe. We have a well-equipped infrastructure in Mumbai, through which we develop and deliver a broad range of outstanding products. Our SS 304 Flanges are austenitic steel products with chromium and nickel contents. When compared to regular steel, 304 Stainless Steel has better corrosion resistance. 304 Grade is widely used for its properties like weldability and ease of formability. These SS 304 Flanges offer resistance to a wide range of atmospheric environments and corrosive media.304 SS Flanges are commonly used to connect pipes, valves, pumps and other equipment to form piping systems.

The stainless steel drawing flanges are offered in different pressure ratings, dimensions and other specifications. These drawing flanges are made of highest quality stainless steel.

Conforming to ASTM and ASME specifications, our stainless steel drawing flanges are suitable to be used in critical hydraulic-pneumatic applications in various industries.

Carbon Steel : ASTM A 105, ASTM A 181

Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91

Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276

Copper Alloys : Copper, Brass & Gunmetal

Size : 1/8" NB TO 48"NB.

Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.

Standard
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48

DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673

B.S : BS4504 , BS4504, BS1560, BS10

Additional Information:

• Delivery Time: Ready Stock

Alloy steel flanges are mainly made up of chromium, molybdenum, and nickel composition along with other products. These flanges show excellent corrosion and oxidation resistance. They are widely used in water lines, oil, and gas, chemical plants, food production systems, etc.

Alloy steel flanges

Alloy steel flanges are mainly made up of chromium, molybdenum, and nickel composition along with other products.

These flanges show excellent corrosion and oxidation resistance. They are widely used in water lines, oil, and gas, chemical plants, food production systems, etc.

Weld neck flange dimensions are covered in ASME B16.5 – which covers Pipe Flanges and Flanged Fittings for size NPS ½” to 24” for above NPS 26” to 60” it should be as per ASME B16.47.

During a dimensional inspection of the weld neck flange, you should check for

• Outer & Inner Diameter of body
• Bolt Circle & Bolt hole Diameter
• the thickness of weld end
• Length of the Hub and
• Straightness and alignment of the bolt hole

tlet side of the expansion joint to increase the size of the flange.

Additional Information:

• Production Capacity: As per requirement
• Delivery Time: Ready stock
• Packaging Details: Standard

Product Details: Flanges

A Flanges is an external or internal rib, or rim (lip), for strength, as the flange of an iron beam or I beam (or a T-beam); or for a guide, as the flange of a train wheel; or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc, or on the lens mount of a camera. Thus a flanged rail is a rail with a flange on one side to keep wheels, etc., from running off. The term "flange" is also used for a kind of tool used to form flanges. All types of flanges i.e, slip on flange, socket weld flange, long weld neck flange, weld neck flange, reducing flange, spectable flange,blind flange, ring joint flange, lapped joint flange, threaded flange, screwed flange, drawing flanges are available for high end industrial requirements. Conforming to different quality standards, flanges are engineered in metals like stainless steel, cabon steel, inconel, monel, nickel, hastelloy titanium, dulex steel, etc. and standards like DIN, ANSI, BS, JIS.

Materials for Flanges

Pipe flanges are manufactured in all the different materials like stainless steel, cast iron, aluminium, brass, bronze, plastic etc. but the most used material is forged carbon steel and have machined surfaces.

In addition, flanges, like fittings and pipes, for specific purposes sometimes internally equipped with layers of materials of a completely different quality as the flanges themselves, which are "lined flanges".

The material of a flange, is basically set during the choice of the pipe, in most cases, a flange is of the same material as the pipe.

All flanges, discussed on this website fall under the ASME en ASTM standards, unless otherwise indicated. ASME B16.5 describes dimensions, dimensional tolerances etc. and ASTM the different material qualities.

Dimensions of Flanges

Each flange ASME B16.5 has a number of standard dimensions. If a draftsman in Japan or a work preparer in Canada or a pipefitter in Australia is speaking about a Welding Neck flange NPS 6, Class 150, Schedule 40 ASME B16.5, then it goes over the flange which in the image here below is shown.

If the flange is ordered, the supplier want to know the material quality. For example ASTM A105 is a forged carbon steel flange, while A182 is a forged stainless steel flange.

So, in a correct order to a supplier two standards must be specified..

304/304L Orifice Flanges, 310/310S Orifice Flanges, 316/316L Orifice Flanges, 317/317L Orifice Flanges, 321/321H Orifice Flanges, 347/347H Orifice Flanges, 446 Orifice Flanges.Stainless Steel, Alloy Steel, Carbon Steel, Duplex steel, Copper Nickel Alloy, Hastelloy, Titanium, Alloy 20, Monel & Inconel Orifice Flanges.The function of an orifice flange is to provide access to a line for metering of gases or liquids. An orifice plate is clamped between a pair of flanges when installed in a line and the whole assembly is refer to as an orifice flange union. Jack-screws within the assembly facilitate removal of the orifice plate. The orifice plate, the metering device, consists of a thin plate with a concentric, square edge, circular hole in the centre. Two pressure tap-holes are drilled in each flange to measure pressure difference through the orifice.

 

Additional Information:

• Delivery Time: Ready Stock

A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.



The most used flange types in Petro and chemical industry are..

Welding Neck flange 
Slip On flange 
Socket Weld flange 
Lap Joint flange 
Threaded flange 
Blind flange

All types except the Lap Joint flange are provided with a raised flange face.

We at Parmar Steel, would like to take the opportunity to introduce as a leading DIN 2566 PN16 Flange Dimensions. DIN 2566 PN16 Flange are stocked or available in the following range of materials and sizes for the oil, gas, petrochemical and allied industries. Pipes with DIN 2566 PN16 Flange can be assembled and disassembled easily. SS DIN 2566 PN16 Flange can be flanges.

As a DIN 2566 PN16 Flange Dimensions. we offer these DIN stainless steel 2565 PN16 rjt flanges, DIN carbon steel 2565 PN16 blind flanges, DIN Alloy steel 2565 PN16 weld neck flanges, DIN stainless steel 2565 PN16 slip on flanges, DIN carbon steel 2565 PN16 socket weld flanges in all standard in which the common world standards include ANSI/ ASME (USA), BS10 (British/ Australian), PN/ DIN (European) and JIS/ KS (Japanese/ Korean).

Get suitable DIN 2566 PN16 Flange manufacturers in UAE, India, Qatar, Singapore, Dubai, UK, Australia and South Africa.Save up to 40% on DIN carbon steel 2565 PN16 Flanges. Visit DIN Stainless Steel 2565 PN16 Flanges manufacturers factory in India, ask for DIN Alloy steel 2565 PN16 Flanges free sample.

Parmar Steel is acknowledged as a manufacturer, exporter & suppliers of GI Steel Flats, available in a variety or grades, materials, and finishes, in metric and inch sizes. We have a full range available always, with unrivalled lead times, superior quality and exemplary customer service, leading GI Steel Flats show off well-fabricated design and functions optimally. We are grouped with the top-notch Suppliers of GI Flats. We always strive to procure the products that are rated high in quality; by succeeding in doing so, we try to exceed the expectations of our clients. And no place across the country can deter us to reach and outreach our clients. We check out all the products before sending to the clients and ensure that they are as per the international quality standards. We retail and supply these products at normal price. These products have features like highly durable, resistance to corrosion and efficient functionality.

PARMAR STEEL is a leading manufacturer, trader, and dealer of Mild Steel Butt Weld End Caps, serving clients across Gujarat, Maharashtra, and throughout India. Our commitment to superior quality and exceptional service has positioned us as a trusted name in the metal and pipe fitting industry.

We specialize in producing durable and reliable mild steel butt weld end caps that meet the stringent demands of various industrial applications. Our Mild Steel Butt Weld End Caps are engineered with precision and manufactured using the finest quality mild steel. These end caps are essential components in piping systems, providing a secure closure to the ends of pipes, preventing leakage, and ensuring the system's integrity.

Whether used in oil and gas, petrochemical, or construction industries, our end caps are designed to withstand high pressure and harsh environmental conditions, making them a reliable choice for piping needs. Our unwavering focus on quality and customer satisfaction distinguishes Sarthi Metal & Pipe Fitting Company from others in the industry.

We adhere to rigorous quality control standards at every production stage, ensuring that each end cap we produce meets international specifications and exceeds client expectations. Our state-of-the-art manufacturing facilities are equipped with advanced machinery and technology, allowing us to make end caps in various sizes and specifications to cater to the diverse needs of our clients.

In addition to our commitment to quality, we pride ourselves on our customer-centric approach. Our team of experts is dedicated to understanding each client's unique requirements and providing customized solutions that align with their specific needs. We offer prompt delivery services, ensuring that our products reach you on time, every time.

Our extensive distribution network across Gujarat, Maharashtra, and other parts of India enables us to serve clients efficiently, regardless of their location. At Sarthi Metal & Pipe Fitting Company, we believe in building long-term relationships with our clients based on trust, transparency, and mutual respect.

We offer competitive pricing without compromising on quality, making us the preferred choice for businesses looking for reliable mild steel butt weld end caps. Whether undertaking a large-scale industrial project or a minor application, you can count on us to provide the best products and services in the industry.

Though a hollow bar looks like a pipe or a tube, they differ from the former components. Firstly, a Hollow Bar Supplier will recommend the use of these components for applications that require high strength. The thicker walls of hollow bars make them stronger and much harder than regular pipes or tubes. Most Hollow Bar suppliers will rightly assert that the strength of both round bars as well as a round carbon steel hollow bar would be similar.

spring steel strip that is 1mm thick, hardened, and tempered is a specific type of spring material that has undergone heat treatment processes to achieve desired mechanical properties. The hardening and tempering processes are crucial steps in enhancing the strength, toughness, and resilience of the spring steel. Here's what each of these terms means in the context of spring steel:

The company is know for providing highly effective aluminum and stainless steel fabrication services according to customized specifications and drawings    

We are a prominent manufacturer of ring joint flanges that are fabricated using superior grades of steel and other alloys. Suitable for various industrial usages, thering joint flanges are resistant to heat, and are extremely durable and reliable with the ability to withstand any amount of stress.

 

Range : 15 NB UP TO 600 NB IN 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS / Table 2.5, table 6, table 10, table 16, table 25, table 40, table 64, table 160, table 320, table 400

Form : Slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss.

Nickel & Copper Alloy
Nickel Alloy
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ), UNS 4400 (MONEL 400 ), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
ASTM / ASME SB 160 UNS 2201 (NICKEL 201)
ASTM / ASME SB 472 UNS 8020 (ALLOY 20 / 20 CB 3)

Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600, 71500, C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30)
ASTM / ASME SB 152 UNS NO C 10100, C 10200, C 10300, C 10800 , C 12000, C 12200.

Stainless & Duplex Steel
Stainless Steel
ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H , 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H

Duplex Steel
ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.

Carbon & Alloy Steel
Carbon Steel
ASTM / ASME A 105. ASTM / ASME A 350 LF 2.

Alloy Steel
ASTM / ASME A 182 GR F 5, F 9, F 11, F 12, F 22, F 91.